TVLogic LUM-310X

Description

The TV Logic LUM-310X is a 4K HDR Reference Master production monitor with a 31-inch Dual Cell LCD designed to reproduce reference HDR content at a maximum luminance of 1,000 nits with a simultaneous deep black minimum of 0.001 nit.

This makes possible a simultaneous contrast ratio nearing 1 million to 1. The LUM-310X supports various HDR standards and multiple colour gamuts including Rec.709, DCI, and Rec.2020.

Lum-310X Features:

• 1:1 Pixel Mapping Modes for SD/HD
  Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

• Blue Only / Mono
  Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Colour (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

• Closed caption

• H/V Delay
  Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

• Marker
  Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

• User Aspect
  Adjusts the Width /Height display ratio.

• Various Scan Modes
  Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

• Waveform/Vector Scope
  Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
  Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

For more information on the TVLogic LUM-310X click here.

 

---

---