The TV Logic 058 (VFM-058W) : 5.5” Full HD Viewfinder
The TV Logic 058 (VFM-058W) has various features such as
- Max Brightness function,
- Temperature Adaptive Color,
- HDMI-to-SDI conversion output,
- 1:1 pixel mode,
- Luma(Y’) Zone Check function,
- DSLR Scale, Waveform,
- Camera Lut.,
- Arri Camera Metadata,
- Range Error,
- Focus Assist,
- Audio Level Meter with speaker
- time code display.
The TV Logic 058 supports 3G-SDI level A/B inputs.
The Audio level meter display
Blue Only / Mono
Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.
Allows the displayed image to be flipped horizontally or vertically. This feature provides flexible mounting options for camera operators.
Key Lock is a password-protection function of the OSD menu so that non-authorized users cannot change the setting of the monitor.
Luma(Y’) Zone Check
Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.
Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.
Max Brightness On/Off
Displays the brightness increases from the normal up to max brightness to obtain a sharp and bright image when shooting outdoors.
Analyzes the input signal’s Luma (Y’) and chroma (C’) information. If the input signal exceeds the designated minimum and maximum values, the pixel will blink. This function allows for the user to easily identify any issues with exposure.
Time Code Display
Displays the Timecode information on the screen.
Adjusts the Width /Height display ratio.
Various Scan Modes
Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.
Magnifies the input signal from 0% to 90%.
For more information click here.
Progressive Broadcast Hire Ltd
Call us to discuss your job or use the form below to email us.
|Monday||9:00 AM - 5:00 PM|
|Tuesday||9:00 AM - 5:00 PM|
|Wednesday||9:00 AM - 5:00 PM|
|Thursday||9:00 AM - 5:00 PM|
|Friday||9:00 AM - 5:00 PM|
|Saturday||Closed but staff are available on call.|
|Sunday||Closed but staff are available on call.|