The TV Logic LVM-171A the Full HD version of TVLogic’s 17inch monitoring solutions.
This unit features a true 16:9 aspect ratio LCD panel with 1920×1080 resolution and 10-bit video processing performance allowing for faithful colour reproduction and video scaling performance.
Features of the TV Logic LVM-171A
1:1 Pixel Mapping Modes for SD/HD
Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.
Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.
Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.
Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the centre of the screen.
Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.
Adjusts the Width /Height display ratio.
Various Scan Modes
Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.
Progressive Broadcast Hire Ltd
Call us to discuss your job or use the form below to email us.
|Monday||9:00 AM - 5:00 PM|
|Tuesday||9:00 AM - 5:00 PM|
|Wednesday||9:00 AM - 5:00 PM|
|Thursday||9:00 AM - 5:00 PM|
|Friday||9:00 AM - 5:00 PM|
|Saturday||Closed but staff are available on call.|
|Sunday||Closed but staff are available on call.|